Mehrkanal-Flüssigkeitsabgabe für peristaltische Pumpe

UTF01- Peristaltikpumpen- Anzeigeseite

UTF01 ist eine vom Chuangrui Peristaltic Pump Filling System unabhängig entwickelte peristaltische Füllpumpe. Es besteht aus einem intelligenten Füllsystem und der Hauptsteuerung. Die Standard-Antriebseinheit hat 4 Kanäle (2 3 4 5 6 optional), die auf bis zu 32 Kanäle erweitert werden kann. UTF01 kann mit mehreren Arten von Smart Peristaltic Pump-Köpfen installiert und an Schläuche mit mehreren Spezifikationen angepasst werden, die die Anforderungen der Kundenanwendung vollständig erfüllen und eine größere Durchflussauswahl bieten. Verschiedene Funktionen, Großbildanzeige, Touchscreen-Bedienung, genauer Durchfluss sorgen für mehr Sicherheit bei der Abfüllproduktion. Es können mehrere Kanäle gleichzeitig zum Befüllen mit Flüssigkeiten geöffnet werden, oder der Füllwert jedes Kanals zum Befüllen individuell eingestellt werden. Kundenspezifische Lösungen unterstützen.

Produkteigenschaften

Filling system	Main controller
Independent drive unit for easy mechanical matching	Large screen touch (7 inch / 10 inch) simple and intelligent
Independent key setting address /fine-tune flow	Manual touch screen /communication instruction, dual operation
Cascadable structure to 32 channels	Arbitrary control of each channel start /stop, forward / reverse
Online / offline flexible dual working mode	Arbitrar hannel simultaneousfilling or suck back
Support internal control / externalcontrol/communication control	Supports simultaneous suck back function of all channels (angle / delay)
Single channel  No bottle No filling functiondrive	Support customer parameter scheme saving and retrievalmatching
Fine adjustment / calibration during filling processmatching	Provide scale adjustment / volume calibration function
Stable operation, strong anti-interference ability	Provide online filling volume adjustment function
Fault alarm to ensure safe production	Provide WiFi function (optional)
Stainless steel housing, sturdy, corrosion-resistant and easy to clean	RS485 bus communication interface, easy external control

Funktionsbeschreibung

Control Mode	Offline Mode	The filling operation is controlled by the main controller.
	Online Mode	Through the external signal, the start-up of filling operation and the stop filling function are realized. When it is used together with the filling machine, the filling machine provides the start signal to complete the synchronization of liquid filling and bottle moving of the filling machine, and the filling machine provides the bottle missing signal to complete the function of bottle missing and stop filling.
Fill/ Recycle	Filling Function	Filling is an auxiliary process of filling, which can quickly fill the liquid into the pipeline, consistent with the direction of filling work.
	Recovery Function	Recovery is to quickly collect and recover the liquid in the pipeline from the outlet of the pipeline after filling, which is opposite to the direction of filling work. All channels can be carried out simultaneously or individually.
Back draw/ Reverse	Back draw Function	Effectively avoid liquid drop during shutdown. Contains two processes of suck-back delay and reverse running.
	Back draw Delay	The time between allocation completion and the start of the reversal.
	Reverse Operation	After the suck-back delay is over, the reverse rotation operation is started, and the reverse rotation angle is 0-1000 degrees.
Operation / Display	Membrane button operation	The membrane address can be used to set the channel address and adjust the filling liquid volume online.
	LED display function	LED display channel address or adjust liquid volume ratio online.
	Touch function	The touch screen operation controller controls the filling operation.
	PC operation	Host computer operation controller-adopts RS485 communication interface and supports ModbusRTU protocol. The host computer sends instructions to the filling unit controller to set controller parameters and control filling operations.
	Wireless connections	Optional WIFI module for wireless connection control.
Function Features	Quantitative Filling Function	The filling system execution unit can be fitted with a variety of Fill Peristaltic Pump heads and adapted to a variety of hose sizes. The controller sets the filling volume for quantitative filling.
	Lack of bottle filling stop function	Each channel has an independent bottle-out signal receiving terminal. When a bottle-out signal is received, the system will stop the filling operation of the channel.
	Liquid calibration function	It is used for accurate calibration of filling volume. Each channel can independently perform online scale adjustment, weighing calibration, and multiple weighing calibration.
	Channel enable function	You can set the enable or disable of each channel arbitrarily. The prohibited channels will not be filled.
	Customer data storage function	Filling series parameter settings can be saved as commonly used data, and the saved parameter scheme can be called as required.
	Password protection function	By setting a password, the system parameters set by the user are protected to prevent misoperation.

•